Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a back door such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes.
According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: Direct contact between components and power or lightning circuits, static charge buildup on cables and component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) and potential differences (even from building to building, between safety grounds to which components are connected.)
Technical Information
Plug/Connector Type:
Not Applicable
Receptacles:
Not Applicable
Power Description
Input Voltage:
Not Applicable
Output Voltage:
Not Applicable
Current:
500A Surge Current
Frequency:
Not Applicable
Filtering:
EMI/RFI Noise rejection (100 kHz to 10 mHz) 0 dB
Environmental Conditions
Temperature:
5 °F (-15 °C) to 149 °F (65 °C) Operating
Temperature:
5 °F (-15 °C) to 149 °F (65 °C) Storage
Humidity:
0% to 95% Relative Humidity Operating
Humidity:
0% to 95% Non-condensing Relative Humidity Non-operating
Physical Characteristics
Power Cord/Cable:
Not Applicable
Color:
Black
Dimensions:
3.2" Height x 1.7" Width x 1.1" Depth
Shipping Dimensions:
5.1" Height x 5.4" Width x 1.4" Depth
Weight:
4.32 oz
Shipping Weight:
5.44 oz
Miscellaneous
Package Contents:
ProtectNet PV
12 inch Coaxial Patch Cable
Additional Information:
Catastrophic Event Protection
Coax Protection
Certifications & Standards:
UL Recognized
Warranty
Standard Warranty:
Lifetime
Shipping Restrictions
This item is not available for Budget Shipping or free shipping promotions.
"APC ProtectNet Cable Surge Suppressor")
