Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a back door such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes.
According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: Direct contact between components and power or lightning circuits, static charge buildup on cables and component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) and potential differences (even from building to building, between safety grounds to which components are connected.)
Technical Information
Plug/Connector Type:
Not Applicable
Receptacles:
Not Applicable
Dataline Protection:
RJ-45 DSL/Fax/Modem
Power Description
Current:
200A Surge Current
Filtering:
EMI/RFI Noise rejection (100 kHz to 10 mHz) 0 dB
Environmental Conditions
Temperature:
5 °F (-15 °C) to 113 °F (45 °C) Operating
Temperature:
5 °F (-15 °C) to 113 °F (45 °C) Storage
Humidity:
0% to 95% Relative Humidity Operating
Humidity:
0% to 95% Non-condensing Relative Humidity Storage
Physical Characteristics
Power Cord/Cable:
Not Applicable
Color:
Beige
Dimensions:
4.05" Height x 1.87" Width x 1.1" Depth
Shipping Dimensions:
4.1" Height x 3.55" Width x 1.15" Depth
Weight:
0.14 lb
Shipping Weight:
0.3 lb
Miscellaneous
Package Contents:
ProtectNet PTEL2
User Manual
Additional Information:
Catastrophic Event Protection
System Requirements:
Use only for analog modems, fax machines and other telecommunication devices
The PTEL2 must be connected to earth ground
Certifications & Standards:
CSA
UL 497A
UL Listed
Warranty
Standard Warranty:
10 Year Repair/Replace
Shipping Restrictions
This item is not available for Budget Shipping or free shipping promotions.
"APC ProtectNet Analog Telephone Line Surge Suppressor")
