Adtran Atlas 800 Series T1/PRI Module - 4 x Channelized T1/ISDN PRI
free shipping
Item #:
N-71561
Category:
Wired Networking
Availability:
Item is in stock
Packaging:
Retail Packaging
Platform:
Windows
Condition:
New
Brand:
Adtran
Your Price: $1614.68
Add To Cart

Product Rating

(0 Ratings) Write a Review

General Information
The Quad T1/PRI module combines with other ATLAS components to implement a variety of WAN access products, including a T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access Cross-connect System (DACS). The module provides four network ports, each of which can be independently configured to operate in T1 (DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes.

The Quad T1/PRI module can perform T1- to-PRI conversion, translating between the robbed-bit signaling presented in a channelized T1 circuit and the D-channel signaling of a PRI circuit. When using the Quad T1/PRI module, ATLAS operates in a DACS mode supporting DS0 time slot interchange and DS0 grooming while preserving robbed bit signaling. ATLAS can be fully populated with Quad T1/PRI modules to support a pure DACSing application of 34 T1 circuits.

Configuration of the Quad T1/PRI module can be accomplished through a variety of mechanisms, including Telnet or VT100 emulation. SNMP management is supported
for alarm and event reporting.

Extensive T1 circuit monitoring is standard with the Quad T1/PRI module, including the ability to detect, store, and report all performance parameters specified in AT&T Technical Reference 54016. The module detects and reports alarm conditions associated with the circuit, including Loss of Signal, Red Alarm, Blue Alarm, Yellow Alarm, and for PRI circuits, D-Channel Synchronization.

The Quad T1/PRI module responds to standard loopback commands from the telephone company central office - both in-band commands and those sent through the Facilities Data Link. In addition, local and remote loopbacks (both line and payload) can be initiated from ATLAS. When testing the T1 circuit, the Quad T1/PRI module allows the user to select from a variety of test patterns, including all 1s, all 0s, and a standard QRSS pattern. When sending the QRSS pattern, the Quad T1/PRI module records and reports the results of the testing to the user.

Technical Information
Application/Usage:Wide Area Network

Interfaces/Ports
Interfaces/Ports:4 x Channelized T1/ISDN PRI LAN
Interfaces/Ports Details:4 x RJ-48C T1/PRI

Media & Performance
Connectivity Media:ISDN PRI T1
Distance Supported:1.14 Mile DS-1
Distance Supported:655 ft DSX-1
Data Transfer Rate:1.54 Mbps T1

Management & Protocols
Management:
  • Configuration of the Quad T1/PRI module can be accomplished through a variety of mechanisms, including Telnet or VT100 emulation. SNMP management is supported for alarm and event reporting.
  • Protocols:ISDN
    Protocols:HDLC
    Protocols:SNMP

    Power Description
    Power Consumption:6.50 W

    Environmental Conditions
    Temperature:32°F (0°C) to 113°F (45°C) Operating
    Temperature:-4°F (-20°C) to 158°F (70°C) Storage
    Humidity:Up to 95% Non-condensing Relative Humidity

    Miscellaneous
    Package Contents:
  • Four RJ-48 to RJ-48 cables (15 feet)
  • Two RJ-48 to RJ-48 crossover cables (15 feet)
  • Two RJ-48 to DB-15 adapters
  • User manual
  • Additional Information:
  • Four T1/PRI interfaces
  • Built-in CSUs
  • Configurable for DS-1, PRI, or DSX-1 operation
  • Maximum distance 6,000 ft
  • AT&T 54016, 62411 and ANSI T1.403 compliant
  • D4 and ESF framing formats
  • AMI and B8ZS line coding
  • D-Channel to robbed bit signaling conversion
  • ESF performance monitoring
  • Local and remote loopback support
  • Generates and detects QRSS test pattern
  • Compliant with Lucent 4ESS/5ESS, Nortel DMS100 and National ISDN
  • Lightning protection
  • Occupies a single slot in the ATLAS 800 series chassis
  • Hot swappable
  • Framing: D4, ESF
  • Line Coding: AMI, B8ZS
  • LBO: 0, 7.5, 15, 22.5 dB; 266, 399, 533, 655 feet
  • System Timing: Network, Internal, External
  • T1 Signaling Methods:- E&M Immediate, E&M Wink, Ground Start, Loop Start, Feature Group D
  • Conversion:- Robbed Bit Signaling to ISDN D-Channel, AMI to B8ZS, D4 to ESF
  • Switch Compatibility: PRI Mode: Lucent 4ESS/5ESS, Nortel DMS-100, National ISDN
  • Switch Emulation: PRI Mode: Lucent 4ESS/5ESS, Nortel DMS-100, National ISDN
  • Test Patterns: QRSS, All 1s, All 0s
  • Alarms: Loss of Signal, Red, Yellow, Blue, D-Channel
  • Performance Monitoring: ES, BES, SES, SEFS, LOFC, CSS, UAS, LCV, PCV, LES
  • Signal Monitoring: AB signaling bits for all DS0s, individual monitor jacks for each port

    Diagnostics:
  • Local Loopback - Line and Payload
  • Remote Loopback - Line and Payload
  • Compatibility:
  • ATLAS 800 series chassis

    Switch Compatibility:
  • PRI Mode: Lucent 4ESS/5ESS, Nortel DMS-100, National ISDN
  • Certifications & Standards:
  • FCC Part 15, Class A 1950
  • UL 1950
  • Canadian UL (CUL)
  • Warranty
    Limited Warranty:5 Year
    Parts Warranty/Labor:5 Year




    Product images may differ from actual product appearance.
    Be the first to review this product. Write a Review
    Shipping Restrictions
    • This item cannot be shipped to PO Boxes.
    • This item can be shipped only within the U.S.


    • UPC: 607565004889 
    • Mfr's Part #: 1200185L3