Specials
CALL US 1-800-755-4619

Related Products

Cisco 8-channel Packet Fax/Voice DSP Module $259.11
Cisco 8-channel Packet Fax/Voice DSP Module
Cisco 64-Channel Packet Voice/ Fax DSP Module $1998.22
Cisco 64-Channel Packet Voice/ Fax DSP Module
Cisco 32-channel Packet Fax/Voice DSP Module $1016.20
Cisco 32-channel Packet Fax/Voice DSP Module
Cisco 48-channel Packet Fax/Voice DSP Module $1505.83
Cisco 48-channel Packet Fax/Voice DSP Module
Cisco 16-channels Packet Fax/Voice DSP Expansion Module $514.64
Cisco 16-channels Packet Fax/Voice DSP Expansion Module
Cisco Voice/Fax Network Module - 2 x Expansion Slot $1656.77
Cisco Voice/Fax Network Module - 2 x Expansion Slot
Cisco Voice/Fax Network Module - 2 x Voice Interface Card (VIC) $702.69
Cisco Voice/Fax Network Module - 2 x Voice Interface Card (VIC)
Cisco High Density Voice/Fax Extension Module - 8 x FXS/DID $980.41
Cisco High Density Voice/Fax Extension Module - 8 x FXS/DID
Cisco 4-Port FXS/DID Voice/Fax Interface Card - 4 x FXS/DID $566.18
Cisco 4-Port FXS/DID Voice/Fax Interface Card - 4 x FXS/DID
Cisco IP Communications High-Density Digital Voice/Fax Network Module - 2 x T1/E1 - 1 x VIC/VWIC
Cisco IP Communications High-Density Digital Voice/Fax Network Module - 2 x T1/E1 - 1 x VIC/VWIC
Click to enlarge
free shipping
Item #:
N-54104
Category:
Wired Networking
Availability:
Item is in stock
Packaging:
Retail Packaging
Platform:
Windows
Condition:
New
Brand:
Cisco
Your Price: $2169.19
Add To Cart

Product Rating

(0 Ratings) Write a Review

General Information

Network modules provide enterprises, managed service providers, and service providers with the ability to directly connect the public switched telephone network (PSTN), traditional telephony equipment (such as private branch exchange (PBX), key systems, analog telephones, and fax machines.

This Module includes two built-in T1/E1 ports and a VIC/VWIC slot that can be fitted with either digital or analog/BRI voice/WAN interface cards. Supports a maximum of 120 channels of digital voice, or 60 channels of digital voice and four channels of analog voice in medium complexity codec. Must be used with up to four PVDM2 Packet Fax/Voice DSP modules.

Technical Information
Application/Usage:Data Networking

Interfaces/Ports
Interfaces/Ports:2 x T1/E1 WAN
Interfaces/Ports Details:2 x T1/E1 WAN

Media & Performance
Data Transfer Rate:1.54 Mbps T1
Data Transfer Rate:2.05 Mbps E1

I/O Expansions
Expansion Slots:1 x VIC/VWIC
Daughter Cards:No

Management & Protocols
Management:
  • Cisco Voice Manager
  • SNMP protocol compliant
  • Manageable via a MIB browser
  • CiscoView interface for configuration
  • ConfigMaker
  • NetSys supported
    • Protocols:SNMP
    Protocols:VoIP
    Protocols:VoFR
    Protocols:VoATM
    Protocols:MGCP
    Protocols:SIP

    Controls/Indicators
    Status Indicators:
  • AL
  • LP
  • CD
  • EN
  • PVDM 0
  • PVDM 1
  • PVDM 2
  • PVDM 3

    • Environmental Conditions
    Temperature:32°F (0°C) to 104°F (40°C) Operating
    Temperature:-13°F (-25°C) to 158°F (70°C) Storage
    Humidity:5% to 85% Non-condensing Relative Humidity Operating
    Humidity:5% to 95% Non-condensing Relative Humidity Non-operating

    Miscellaneous
    Additional Information:
  • Network module contain four 80-pin SIMM sockets for PVDM2s
  • Toll Bypass Support
  • Telephony Interface Signaling Support
  • Cisco SRST maintains basic telephony services at the branch office even if Wan goes down
  • NM-HDV2-2T1/E1 with VIC2-4FXS/DID in VIC/VWIC slot. Enables FXS connectivity to analog phones/fax machines and 2 T1 digital trunk access the PSTN and WAN access.
  • This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls
  • Support for 4 to 120 channels with the new PVDM2 and featuring the latest digital signal processing technology
  • The module is Interoperable with the full range of Cisco IP Communications solutions

    • T1 Network Interface:

  • Line Code: AMI, B8ZS
  • AMI Ones Density: Enforced for N x 56 Kbps Channels
  • Framing Format: D4 (SF) and ESF
  • Output level (LBO): 0, -7.5, or -15 dB
  • Input Level: +1dB0 down to -24 dB0
  • DTE Interface (WIC mode): Fractional Service
  • DTE Interface (VIC mode): G.704/Structured
  • DCE Interface: G.704/Structured

    • E1 Network Interface:

  • Data Rate: 1.984 Mbps (framed mode) Per E1 Port
  • Clocking: Internal and Loop (recovered from network)
  • E1 National Bits: Fixed (non-configurable)
  • Encoding: HDB3
  • DTE Interface (WIC mode): Fractional Service
  • DTE Interface (VIC mode): G.704/Structured
  • DCE Interface: G.704/Structured
    • System Requirements:

    Software and Memory Requirements:

  • Cisco 2600XM:
    • IP Plus images and higher
    • 64 MB DRAM
    • 32 MB Flash
  • Cisco 2691:
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash
  • Cisco 3700:
    • IP Plus images and higher
    • 128 MB DRAM
    • 32 MB Flash

    Supported Platforms & Minimum IOS Versions:

  • 3845 - 12.3(11)T
  • 3825 - 12.3(11)T
  • 3745 - 12.3(7)T
  • 3725 - 12.3(7)T
  • 2691 - 12.3(7)T
  • 2600XM Series - 12.3(7)T
    • Compatibility:

    Supported Platforms:

  • 3845
  • 3825
  • 3745
  • 3725
  • 2691
  • 2600XM Series
    • Certifications & Standards:
  • FCC Class B device
  • EMC 47CFR15 Subpart B 2002, T1
  • Safety IEC60950
  • Telecom 47 CFR part 68, TIA/EIA 968-A

    • Warranty
    Limited Warranty:90



    Product images may differ from actual product appearance.
    Be the first to review this product. Write a Review
    Shipping Restrictions
    • This item cannot be shipped to PO Boxes.
    • This item can be shipped only within the U.S.


    • UPC: 746320832128 
    • Mfr's Part #: NM-HDV2-2T1/E1=