IDEAL LinkMaster PRO Tester - 1 x RJ-45 Network , 1 x RJ-45 Network Remote
free shipping
Item #:
N-102965
Category:
Tools & Testers
Availability:
Item is in stock
Packaging:
Retail Packaging
Platform:
Windows
Condition:
New
Brand:
IDEAL IND
 
 
Your Price: $64.12

Add To Cart

Product Rating

(0 Ratings) Write a Review


General Information

The LinkMaster PRO Tester enables installers,contractors and maintenance technicians to map, test and troubleshoot data and voice communication cable and coax runs. Rugged, versatile, and easy-to-use, the LinkMaster PRO tester has mastered the link between performance, simplicity and value for both commercial and residential applications.

Technical Information
Device Function:Open Circuit Testing
Device Function:Short Circuit Testing
Device Function:Split Pair Testing
Minimum Length Measurement:3 ft
Maximum Length Measurement:600 ft

Interfaces/Ports
Network (RJ-45):Yes
Number of Network (RJ-45) Ports:2

Controls/Indicators
Status Indicators:
  • Battery low LED
  • OPEN - There is no "OPEN" LED indication. A typical cable may have 2, 3, or 4 pairs. OPENS are displayed as an unlit LED. The user will determine if a pair is present and continuous or OPEN by comparing the illuminated LEDs to the expected number of pairs that should be good. For example, when testing a 4 pair cable, three illuminated LEDs in the PASS area indicate the presence of an OPEN condition in one of the pairs
  • SHORT - A short circuit condition exists
  • MISWIRE - Indicates the improper assignment of individual wire pairs to pins for the wiring schemes tested. Tester checks T568A, T568B, 10Base-T, and Token Ring configurations
  • REVERSAL - Reverse wiring means the pin for one wire in a pair is connected to the opposite pin for the pair in the remote jack
  • SPLITPAIRS - Split Pairs occur when the tip (positive conductor) and ring (negative conductor) of two twisted pairs are interchanged

Pass Indicators:

  • T568A and T568B
  • Four green LEDs on pairs 1-2, 3-6, 4-5, and 7-8. All four pairs are terminated correctly
  • Token Ring
  • Two green LEDs on pairs 3-6, and 4-5. Both pairs terminated correctly
  • 10 Base-T
  • Two green LEDs on pairs 1-2, and 3-6. Both pairs terminated correctly
  • Shield
  • Green SHIELD LED indicates the shield on the cable is correctly and continuously wired through the modular plug termination

FAIL Indicators:

  • A flashing pair LED indicates that this wire pair has a fault. A flashing LED in the FAIL section will indicate which fault was detected. Multiple flashing LEDs indicate multiple pairs and/or multiple faults. Best practice is to correct cable faults until cable is verified as correct with appropriate green LEDs

Battery Information
Battery Size Supported:AA

Physical Characteristics
Height:3.3"
Width:2"
Depth:1.3"
Weight (Approximate):2 lb




Product images may differ from actual product appearance.
Be the first to review this product. Write a Review
Shipping Restrictions
  • This item cannot be shipped to PO Boxes.
  • This item can be shipped only within the U.S.


  • UPC: 783250622009 
  • Mfr's Part #: 62-200